john lewis jlwd1406

[adv]

timer knob in middle doesn’t work/ to select a programme. doesn’t seem to any friction or contact to pcb / is it just something simple like mabe the knob? or more to it than that ? tried to prise knob off . but seems tight didn’t want to break it . help lads

[adv]

Re: john lewis jlwd1406

anyone this is a holiday let people just moved in . need to sort it asap ? 😥

[Martin]

Re: john lewis jlwd1406

The knob should just pull off the Selector Switch (1320507005)

[adv]

Re: john lewis jlwd1406

Martin wrote:The knob should just pull off the Selector Switch (1320507005)

hi are the knobs prone to break mate .? is that the most likely problem?

[Martin]

Re: john lewis jlwd1406

I’ve no clue, I just looked it up in the manual for you that’s all. You may have to remove the fascia first in order to pull the knob off the selector switch I expect.

[adv]

Re: john lewis jlwd1406

ok thanks for your help

[leavemetogetonwithit]

Re: john lewis jlwd1406

Had same on a Zanussi with board along fascia the other day. Had to remove board (tricky) and could not understand why knob shaft wasn’t engaging with switch on board. Turned out that at some time in the past the machine must have been dropped on its front (dents and scratches were visible) and the shaft of the knob had got pushed too far into the body of the knob so that it would no longer reach the board behind.
The knob was captive in the fascia so wasn’t able to pull it off until I’d got the board out. (Take your fine side cutters!)
Mike.

[adv]

Re: john lewis jlwd1406

this was just a cracked timer knob

[Author]

Posts