john lewis jlwm1203

[adv]

this the door lock keeps clicking and wont start, is it gona be the interlock or the pcb that causes this ? cheers

[timdowning]

Re: john lewis jlwm1203

Just warming up my crystal ball. Its looking like the interlock, but hang on theres possibly a dark cloud over it!

(Normally just the lock)

[adv]

Re: john lewis jlwm1203

thanks mate

[twicknix]

Re: john lewis jlwm1203

I recently replaced a door lock on the same make and model on Thursday. The machine was left in working order.

Today (Saturday) I got a phone call saying that after 7 washes, the machine threw up the E40 error code. Surely it can’t be the interlock again as it’s brand new? However this is Zanussi based machine, I have come across a fair few Zanussi with same fault along with blown module – they are of similar age 4/5 years old.

Would I be looking at the same issues with John Lewis machines? Just concerned of recurring faults.

I will check the interlock, wiring and module when I go over on Tuesday.

[Martin]

Re: john lewis jlwm1203

twicknix wrote:Would I be looking at the same issues with John Lewis machines?

Yes of course, they are just rebadged Zanussi’s after all said and done! 😉

[twicknix]

Re: john lewis jlwm1203

Yep, blown board. £180 job but opted for new machine instead.

[Author]

Posts