Just A Suggestion

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #33026
    kwatt
    Keymaster

    If it were me and I received the letter I did from DAG the other day regarding Gas Safe Handling, I’d do what I did, which was call them up and tell them that it was a load of bollox and we didn’t need it for R600a and, as I was later informed, very possibly not for R134a either.

    Then I’d tell them, as I did, to shove the work as it wasn’t worth the hassle and expense of getting the certification for it to do domestics.

    Now, if they want to pay commercial rates then we’ll have another discussion about it… they didn’t go for that.

    But then later on I gave Mr Dales a shout, who knows more on this area than I do, who told me about the R143a thing and a few other bits and bobs to add to me “ferk orf” arsenal.

    Now the suggestion is, if it were me that saw this and if I was formulating strategy, I’d press-gang him into WTA service and have him represent the WTA to the ACRIB mob (http://www.acrib.org.uk/) so that the indies have representation there as, as you can see, there currently is none.

    Ian is well capable enough to do that and, I think, would do an excellent job of representing us and fighting our corner.

    Just a suggestion though. 😉

    K.

    #237168
    Penguin45
    Participant

    Re: Just A Suggestion

    Has he got the time…..? Informed and erudite enough.

    Chris.

    #237169
    kwatt
    Keymaster

    I think so, not asked yet as I wanted to run it past you guys first.

    K.

    #237170
    Lawrence
    Participant

    Re: Just A Suggestion

    If he is up for it ,and can get it past Alma 😆 Absolutely ..the man is a walking encyclopedia on all things cold .
    Lawrence .

    #237171
    aqualectric
    Participant

    Re: Just A Suggestion

    That sounds like an excellent idea – information is power after all. Having someone with in – depth knowledge leaves us as a TA less open to being spoon fed bulls4it. Then we can honestly and correctly advise the membership on any query they may have.
    Now all we need is a brave soul to sound out CORGI…….. 😉

    Steve.

    #237172
    Lawrence
    Participant

    Re: Just A Suggestion

    aqualectric wrote:Now all we need is a brave soul to sound out CORGI…….. 😉 Steve.

    I think Kens been there and still has the scars to prove it …….
    Lawrence

    #237173
    kwatt
    Keymaster

    Indeed.

    I’m not done with that lot yet. 😈

    K.

    #237174
    VillageIdiot2
    Blocked

    Re: Just A Suggestion

    Sound good to me…. as Steve said…. knowledge is power! If he can help the association, and is prepared to come on board…. Bring him on!

    Adrian 😀

    #237175
    kwatt
    Keymaster

    In that case… Lawrence do you want to give the cranky old one a ring and ask if he’ll help out? 😉

    K.

    #237176
    Lawrence
    Participant

    Re: Just A Suggestion

    Leave it with me….
    Are we co-opting him ,or inviting him to join the council ?
    Lawrence

    #237177
    kwatt
    Keymaster

    I’d say co-opt for now then take a view.

    K.

    #237178
    Dales-Electronic
    Moderator

    Re: Just A Suggestion

    Many thanks for the invite – forget ACRIB at this point they are just a register of fridge engineers not the mouthpiece. I’ll be tackling the Institute of Refrigeration in the New Year and with you support put forward the points of view of the WTA with regard to the domestic appliance fridge area.

    #237179
    kwatt
    Keymaster

    Welcome aboard Ian.

    Or is that “welcome to the insanity”? 😉

    As we spoke about on the phone I’d agree with the tactic, let’s make them aware that we’re here and see where it goes form there.

    K.

    #237180
    VillageIdiot2
    Blocked

    Re: Just A Suggestion

    Welcome on board Ian :tup:

Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.