Kenwood kid45s17

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Kenwood kid45s17

Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • Author
    Posts
  • February 7, 2020 at 1:01 pm #466244
    Ray Thornton
    Participant

    I have given up, took it to our local friendly repair guy in town

    February 7, 2020 at 8:05 pm #466245
    electrofix
    Moderator

    there is a large relay on the board that controls the heater. check for bad solder joints after that you could try sourcing and changing relay

    Dave

    February 7, 2020 at 8:14 pm #466246
    Ray Thornton
    Participant

    Thanks Dave,
    I found it, checked for dry joints but found none, chucked it at the local repair bloke
    Back at work tomorrow do can’t spend too much time on it

    February 22, 2020 at 3:15 pm #466247
    Ray Thornton
    Participant

    I got it back from the repair guy, took the pcb and removed the relay
    It’s a MPL-112-A-T meishuo
    Any idea where I can source one quicker tha ebay but based in China?
    Is there a alternative I can use?
    Thanks

    February 22, 2020 at 8:16 pm #466248
    Ray Thornton
    Participant

    Ordered this one
    https://uk.farnell.com/oeg-te-connectivity/omi-sh-112lm-394/relay-spst-no-250vac-30vdc-10a/dp/1891750

    It’s rated as 16a on the pdf, I will test on the bench first

  • Author
    Posts
Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • You must be logged in to reply to this topic.