Kenwood KID60S18 dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Kenwood KID60S18 dishwasher

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 12, 2025 at 8:50 am #103219
    dunston
    Participant

    This dishwasher fills and starts to wash then a F19 error and drains out the water.
    We have replaced the Diverter with Leili Synchronous motor : 50SM16-494S (VST32030462)
    Same fault.
    Has anyone had the same problem?

    February 13, 2025 at 9:24 am #492258
    kwatt
    Keymaster

    I don’t seem to have access to the tech on that model based on the model number. Do you have the serial number?

    K.

    February 13, 2025 at 9:48 am #492259
    dunston
    Participant

    The serial number of the dishwasher is 01714471002235180072.
    cheers Mark

    February 13, 2025 at 4:12 pm #492260
    kwatt
    Keymaster

    Are you sure you’re getting F19 as it only seems to go to F9, which is:

    F9 (DIVERTER POSITION PROBLEM)

    DIVERTER

    • Check the values of the diverter.

    • Check the cable connection of the diverter.

    ELECTRONIC CARD

    • Check the electronic card

    K.

    February 18, 2025 at 11:20 am #492261
    dunston
    Participant

    yes it was F9. sorry about the confusion. It was not my post. thanks for info. I suspect it is the electronic board.
    Thanks Mark

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.