Lamona (Hoover) W/D HJA8703 Dryer stats

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Lamona (Hoover) W/D HJA8703 Dryer stats

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #93005
    grooster
    Participant

    Hi,

    I wonder if anybody can give me the part numbers for the thermostats, cutouts on this machine for the dryer section. I can’t just work them all out from the photos on connect.
    From memory there are two cut outs and an NTC.
    I’ve been out to this and reset the cut outs. I tried it with the door open and its blowing hard enough, no blockages. I put it down to human error when they admitted to switching it off before the cool down, but its done it again the next dry load.

    Many thanks

    Nick

    #452880
    electrofix
    Moderator

    Re: Lamona (Hoover) W/D HJA8703 Dryer stats

    this one ?

    https://shop.ukwhitegoods.co.uk/9121352 … thermostat

    cant find any pictures of condenser but had a hoover unit doing this ended up it was a blockage at the bottom of the condenser in the rubber hose that lets water go back into the drum. cant confirm if yours is the same

    Dave

    #452881
    kaibart
    Moderator

    Re: Lamona (Hoover) W/D HJA8703 Dryer stats

    Your correct Dave more than likely a blockage in the condenser or the fan blade will be full of fluff never changed these stats 9 out of 10 tens it’s a blockage

    #452882
    grooster
    Participant

    Re: Lamona (Hoover) W/D HJA8703 Dryer stats

    Thanks for the info. Its defo not a blockage, like I said I got it working with the door open to test the flow and it was very strong. Ive got the NTC and cut outs ordered.
    Thanks

    #452883
    electrofix
    Moderator

    Re: Lamona (Hoover) W/D HJA8703 Dryer stats

    still check the one I had seemed to be ok till I stripped it

    Dave

    #452884
    grooster
    Participant

    Re: Lamona (Hoover) W/D HJA8703 Dryer stats

    Will do, I’m going back tomorrow, cheers

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.