Lamona Range Cooker Overheating After New Elements/Thermostat

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Lamona Range Cooker Overheating After New Elements/Thermostat

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 30, 2021 at 12:15 pm #100402
    kkkbbb7788
    Participant

    Hi, hoping someone can help me, have a Lamona HJA5110 range cooker, previously had a new element fitted on the RHS oven and it was overheating, so had a new thermostat fitted, still overheating, so never used it. So recently fitted new elements to both sides (LHS and RHS) with a new thermostat on the RHS (left hand one was fine), problem is now both ovens are overheating to approx 280 and 300 degrees. Any ideas? Advice? would be most welcome, thank you

    December 30, 2021 at 4:05 pm #480464
    tubafan
    Participant

    Are you sure the wiring to the thermostats is correct and their probes are correctly located as it seems unlikely that both are faulty.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.