Lavamat 64600 trying to get motor off to change carbon brush

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Lavamat 64600 trying to get motor off to change carbon brush

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 16, 2012 at 7:24 pm #69512
    MikeFennell
    Participant

    Does anyone have experience of removing a motor from an AEG lavamat 64600? I want to change the carbon brushes. I have got the back plate off and have removed the 4 main screws which appear to be holding the motor to the drum, but it just won’t shift! Any ideas what is holding it on? Any advice would be gratefully accepted, else i’ll be scrapping it.

    PNC 91400309000

    May 16, 2012 at 8:12 pm #375037
    Seamy
    Participant

    Re: Lavamat 64600 trying to get motor off to change carbon b

    Once the 4 screws securing it to the tub are removed, give it a tap backways, it should release. Carefull it doesn’t drop on tiled floor though.

    May 18, 2012 at 4:19 pm #375038
    MikeFennell
    Participant

    Re: Lavamat 64600 trying to get motor off to change carbon b

    Great tip, worked a treat! Now to order the brushes.

    May 22, 2012 at 10:38 pm #375039
    MikeFennell
    Participant

    Re: Lavamat 64600 trying to get motor off to change carbon b

    Brushes turned up today. Fitted and tested. machine works like new! Many thanks!! 😀

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.