LG motor

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG motor

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 4, 2006 at 10:58 am #18891
    Goatboy
    Participant

    NWAR wrote:CE = CURRENT ERROR SHORT CIRCUIT TO MOTOR OR MAIN PCB DUFF

    Quick un I think.

    Does anybody know if this model is a three phase motor, please?

    WM11150

    It has fault CE, and we think it’s the PCB (Especially if this is a 3 phase motor). The motor stalls under load on wash, but spins with load, no problem 😕

    July 4, 2006 at 11:35 am #180791
    Dave_Conway
    Participant

    Re: LG motor

    It doesn’t actually say on the tect info, it does give this though:


    Take a reading between pins 1 ~ 2, 1 ~ 3 and 2 ~ 3 on the motor all should be around 6.5 ohms.

    If that’s OK then it’s the PCB.

    Dave.

    July 4, 2006 at 11:37 am #180792
    Goatboy
    Participant

    :tup:

    July 5, 2006 at 8:29 am #180793
    steve486
    Participant

    Re: LG motor

    The motor is not 3 phase, and it is more than likely to be the PCB.

    July 5, 2006 at 8:39 am #180794
    Goatboy
    Participant

    Re: LG motor

    I stuck my neck out, and ordered the PCB yesterday 😀

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.