LG WTR1071TP

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LG WTR1071TP

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 4, 2005 at 8:08 pm #9380
    machineman
    Participant

    LG top loader why would one of these go into spin mode on wash and spill water all over the floor first one of these ive seen,even got a spirit level on board.m

    May 11, 2005 at 12:42 pm #133760
    Kenny
    Participant

    Re: LG WTR1071TP

    sounds like to much water in the drum to me.

    checked the water pressure switch?

    May 11, 2005 at 10:45 pm #133761
    andy2
    Participant

    Re: LG WTR1071TP

    machineman – Don’t know anything specifically about these machines but spinning during wash is usually due to a loss of motor control by the electronics. This is often due to a short circuit triac on the control module but it could also be failure of feedback from the tacho (if there is one – depends on the type of motor used). Check that the tacho coil is not o/c and that the magnet is fitted and is secure.

    Andy

    May 11, 2005 at 11:41 pm #133762
    alexa
    Participant

    Clutch or brake?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.