LIEBHERR F/F BOARD

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › LIEBHERR F/F BOARD

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 26, 2011 at 12:40 pm #64704
    johnmac11
    Participant

    Went to a 2 years old f/f today model CUN3031 which was dead. Upon inspection I found the small pcb next to the compressor had blown tracks next to the middle connector which is the mains in to the board. All other components check out fine so I assumed it was just the board. Just as I was about to leave the customer informed me that when the fridge went dead she noticed that the bulb had blown…

    Anyone saw a blown bulb take out this pcb before or know of any other reason why it would blow??

    thanks

    John

    August 26, 2011 at 12:51 pm #357816
    admin
    Keymaster

    Re: LIEBHERR F/F BOARD

    Hi John

    Common problem,the board is approx £60 from leibherr.

    Bryan

    August 26, 2011 at 1:01 pm #357817
    johnmac11
    Participant

    Re: LIEBHERR F/F BOARD

    Thanks Bryan 😆

    John

    August 27, 2011 at 10:53 am #357818
    Seamy
    Participant

    Re: LIEBHERR F/F BOARD

    Off topic a bit..
    Any one have the cross reference of Liebherr to Miele parts, i’ve a Miele KFN8462 that gives F4 every now & again, reckon it needs Freezer NTC sensor. Think the Miele one is a tad expensive.

    August 27, 2011 at 5:16 pm #357819
    admin
    Keymaster

    Re: LIEBHERR F/F BOARD

    9590142 SENSOR KIT Approx £25

    Bryan

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.