Logik LIW714W15 Door won’t open

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Logik LIW714W15 Door won’t open

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 10, 2022 at 1:34 pm #101336
    Geoff1312
    Participant

    Hi Guys,

    called to the above machine, door handle broken.
    Replaced (had to have complete door), door was still not opening at end of cycle.
    Suspected interlock so replaced this (MDI17438100000456).
    However door is still holding closed.
    The interlock will release eventually when power switched off to machine.

    Any Ideas please ?
    Thanks in advance

    November 10, 2022 at 1:42 pm #484364
    matrixresonator
    Participant

    Blocked/faulty pressure switch?

    November 10, 2022 at 8:51 pm #484365
    electrofix
    Moderator

    shorted triac on the board ?

    you can check this by seeing if the door locks before the start button is presssed

    Dave

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.