lpr600 – 11 flashes!

[dirtyboy]

Has anyone got a tale of flash errors? There are lots of posts about different numbers but none about 11 that I can find….

Anyone got a list?

Thanks.

[gegsy]

Re: lpr600 – 11 flashes!

Hi
Its a water level error, usually two things. 😉
1/ The Water Indicator (WI) gets clogged with crud and will be in need of a tooth brush to clean its grill. (WI is below filters at a 3 oclock position)
2/ Them god awful askoll recirculation pumps (They judder and splutter and generally give poor recirculatuion ) 😆

All is revealed here

Power off if you are to attempt any repair on this appliance and watch the metal edges as they are razor sharp 😉

Greg

[dirtyboy]

Re: lpr600 – 11 flashes!

Thanks for getting back to me…. I have tried cleaning the blue thingy under the filter and when I run the dishwasher it now gets further before beeping. It sounds like it is filling, there are noises from a pump…. some water collects in the bottom covering the filters, then it beeps and empties the water……..hmmmm, looks like I need to take it all apart????? 🙁

[Author]

Posts