Machine overfilling after hot wash

[cliffhanger2]

Yeah I’m going to get a new switch and go from there. Thanks again.

Cliff

[cliffhanger2]

Going for a new switch.

Cliff

[cliffhanger2]

Hi again

It’s a no go here with the NEW switch. Machine still overfills. Other than that it pumps out, washes when draining etc.

I can here a click from the pressure switch when filling but the water doesn’t stop.

You had said that the next step is the board. Bad news it’s not available at present at least it says ring them. How sure can we be that it’s the board?

Cliff

[electrofix]

did you check the electrical connections to the board from the switch ?

Dave

[cliffhanger2]

Thanks Dave

As far as I can see all the wiring and connectors are fine. i don’t have a meter and would need instruction anyway to test. Would you suggest a call out from an engineer, not AEG but someone local.

cliff

[electrofix]

try looking here

https://www.ukwhitegoods.co.uk/search/find-an-appliance-engineer

Dave

[cliffhanger2]

Thanks again. I rang a local company and they say uneconomic repair after telling them what I’ve done. More like they couldn’t test PCB.

A new PCB is £110.00 and there’s not one in Europe! The buyers would have to be contacted when next due.

We wash about once a week. So…. I was wondering about a new machine based on this type of usage.

I know the yardstick is Miele, but can you recommend a machine around 350.00.

Cliff

[electrofix]

there are 2 firms that have repaired boards in the past

EMW electronics
&
QER ( would not trust this one without contacting by phone as website looks like its been taken over so poss scam

Dave

[Author]

Posts