Meile rinse light flashes

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Meile rinse light flashes

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 20, 2011 at 1:21 pm #64043
    pmb
    Participant

    Meile W864. Rinse light flashes, no drum action,
    Nice job putting new brushes in, I thought,
    Brushes looked warn short, So put a set of zannusi brushes in that fitted fine.
    When put on spin, Rinse light starts flashing immediatly,So not pressure tube,
    I had the Brush gear assembly on and off so many times but all ok.
    Maybe Brushes were low, but still OK and it was something else to start with,or maybe Blew something on Board when brushes were arcin.
    I hope somebody can help

    July 20, 2011 at 2:45 pm #355865
    leavemetogetonwithit
    Participant

    Re: Meile rinse light flashes

    http://www.ukwhitegoods.co.uk/forumsphpbb3/viewtopic.php?f=3&t=64603
    Mike.

    July 20, 2011 at 4:55 pm #355866
    pmb
    Participant

    Re: Meile rinse light flashes

    Thanks
    This customer wonts it done quickly and changing relays on PCB
    is not something i would wont to do,
    Told customer to find a Meile Specialist.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.