Miele Commercial WS5427 Washer Dead.

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Miele Commercial WS5427 Washer Dead.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #68972
    delahart
    Participant

    Hi,
    Does anyone have any technical info they can share for this machine. We have power to the switch board but no lights or anything working.
    Del.

    #373313
    Seamy
    Participant

    Re: Miele Commercial WS5427 Washer Dead.

    There should be a full circuit & schematic diagram inside, normally tucked inside machine bottom left hand side.

    #373314
    delahart
    Participant

    Re: Miele Commercial WS5427 Washer Dead.

    Thanks, will check it out.
    Del.

    #373315
    delahart
    Participant

    Re: Miele Commercial WS5427 Washer Dead.

    Hi All,
    We are in deep with this one. Had the boards checked by specialist company but they can only do a limited test and power supply board (in lower part of front) including transformer, seems to be working so we have got and tried the selector programme board. Unfortunately everything still inoperative, no lights etc. However we have supply to button board and from there to power board. We now suspect power board fault but trying anything on this is EXPENSIVE. Does anyone know if Miele will supply any technical help?
    delahart.

    #373316
    iadom
    Moderator

    Re: Miele Commercial WS5427 Washer Dead.

    delahart wrote: Does anyone know if Miele will supply any technical help?

    Who wants to answer this one politely. 🙁

    #373317
    delahart
    Participant

    Re: Miele Commercial WS5427 Washer Dead.

    Thanks, thats cheered me up no end.

    #373318
    Specialist01269
    Participant

    Re: Miele Commercial WS5427 Washer Dead.

    iadom wrote:

    delahart wrote:
    Does anyone know if Miele will supply any technical help?

    Who wants to answer this one politely. 🙁

    Can you answer it politely ?, never had any luck talking to them myself. But some of their local Engineers are quite helpful.

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.