Miele Dishwasher Codes & Test Pgm Needed

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele Dishwasher Codes & Test Pgm Needed

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • November 10, 2010 at 5:07 pm #58734
    myfil
    Participant

    Went to an integrated Miele dishwasher Model G653 SCVI Plus. On Prewash pgm it fills, washes for a short while, stops with the “inlet/drain” LED flashing. By changing the pgm it will them pump out OK. No sign of overfilling.

    On all wash pgms it fills, then aborts with the above LED flashing.
    So fill-to-level/pumpout/wash motor all seem ok. Heater not checked. (Who wants to take out an integrated if they can avoid it!!)

    Could someone please send me the error codes and the test program routine for this machine (the W/Goods handbook promised these would be in the next edition!). Also any info on the above fault.

    Thanks
    Cheers

    November 10, 2010 at 7:26 pm #335479
    Seamy
    Participant

    Re: Miele Dishwasher Codes & Test Pgm Needed

    Likely its got something blocked in the impellor of the was pump

    November 12, 2010 at 5:45 pm #335480
    myfil
    Participant

    Re: Miele Dishwasher Codes & Test Pgm Needed

    Isn’t there a test program for these Mieles? Also fault codes?

    November 12, 2010 at 8:28 pm #335481
    Seamy
    Participant

    Re: Miele Dishwasher Codes & Test Pgm Needed

    Check flow meter & cable connection at it & at board. Flow meter sometimes is not seated correctly & doesn’t pick up the impulses. If you think it fills to correct level but no circulation then wash pump may be blocked

    PM me or e-mail me for fault code display info & i’ll scan something for you

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.