Miele dishwasher G646 fan problem.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele dishwasher G646 fan problem.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 9, 2009 at 9:23 am #43287
    aqualectric
    Participant

    Miele G646SC Plus dishwasher. Type HG01. No. 26/63457892.

    The drier fan runs continuously at the end of the cycle. The customer says it is on until she turns the machine off. Power for the fan seems to be direct from the PCB – or is there anything that may keep the fan on apart from the PCB?
    The price of the PCB is horrifying……so any help please!!

    Thanks,

    Steve.

    February 9, 2009 at 9:19 pm #276741
    Seamy
    Participant

    Re: Miele dishwasher G646 fan problem.

    As far as i’m aware on Miele D’Washers there were a few times for fan run-on, in programming mode it could be set for 4 mins, 14 mins or 45 mins.
    It is changeable.

    February 9, 2009 at 9:31 pm #276742
    aqualectric
    Participant

    Re: Miele dishwasher G646 fan problem.

    Seamy wrote: in programming mode it could be set for 4 mins, 14 mins or 45 mins.
    It is changeable.

    Thanks for the reply, Seamy. How can that be done? Is it a Miele only job or can it be reset manually?


    Steve.

    February 10, 2009 at 11:33 am #276743
    Seamy
    Participant

    Re: Miele dishwasher G646 fan problem.

    Sent you a PM, need your e-mail address to send you info

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.