Miele dryer T7644C

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele dryer T7644C

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 19, 2021 at 4:58 pm #99311
    SWERV
    Participant

    Good afternoon all,
    I haven’t done many Miele dryers, but I’ve been out to the above dryer and the complaint was that the ‘Clean airways light’ would come on after 10-15 mins. I tried it a couple of times and that certainly was the case.
    I have checked the filters, condenser and removed the heater cover and everything seems spotless.
    Any pointers?

    Thanks.
    Merv

    March 19, 2021 at 8:23 pm #475820
    electrofix
    Moderator

    when you say you checked filters did you check the half moon filters in the door. had a lot of them block over time

    Dave

    March 20, 2021 at 5:50 pm #475821
    SWERV
    Participant

    Hi Dave,

    yes, I checked both of those and they were clean.

    Merv

    March 20, 2021 at 10:14 pm #475822
    electrofix
    Moderator

    looks like you can alter sensitivity of the sensor

    https://www.manualslib.com/manual/353721/Miele-T-7644-C.html?page=49#manual

    Dave

    March 21, 2021 at 5:03 pm #475823
    SWERV
    Participant

    Thanks.
    I’ll give it a go.

    Merv

    March 22, 2021 at 6:21 am #475824
    Kentish
    Participant

    Most of time I find its either the condenser fine fins restricted or the duct filters greased up and just in need of hot water and a nylon brush.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.