Miele G645SC plus

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele G645SC plus

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 28, 2011 at 11:37 pm #61370
    rocker
    Participant

    This dishwasher fills runs a cycle then when ready to drain, the fill/drain light flashes…but if I change program, press start, it will drain and start new cycle…as its not the pump!!..poss board !! can anyone advise!!
    thanks John.

    March 1, 2011 at 7:56 am #345876
    Seamy
    Participant

    Re: Miele G645SC plus

    Could be pressure switch bunged up, not emptying quickly enough or the float switch in base

    March 1, 2011 at 3:25 pm #345877
    rocker
    Participant

    Re: Miele G645SC plus

    Seamy, will check these parts out. thanks john

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.