miele g646sc D/W inlet/outlet light flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › miele g646sc D/W inlet/outlet light flashing

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • October 5, 2011 at 6:41 am #65458
    DOCTORDOOM
    Participant

    Hello, went to this yesterday. Light flshing on front, reset and got machine to drain then fill, then got voltage (with volt stick) to moter for a few seconds and it cuts back to the inlet outlet light flashing. The cap is ok and there is no hum from the motor, can’t see how motor comes off and it’s £275 so thought i’d check on here before getting involved.

    October 5, 2011 at 6:01 pm #360619
    mike100
    Participant

    Re: miele g646sc D/W inlet/outlet light flashing

    could be paper or stuff in circ. pump impeller. You will need to take out motor. Not too bad lying on its side.
    Mike

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.