Miele t4262c pcb repair

[steve1]

Hi
Anyone know who can repair the pcb control board on a miele t4262c dryer.
As a new pcb is £300, pcb number is Epwl 300a. Miele part number 6190984
Miele have diagnosed a faulty pcb
Thanks
Steve

[admin]

Re: Miele t4262c pcb repair

Hi

What is the fault that you have ? we might be able to have it repaired dependent on the fault.

Bryan

[steve1]

Re: Miele t4262c pcb repair

Hi Bryan
The dryer works ok on 20 mins warm air but any other setting eg automatic etc it starts up the 20 seconds later it stops and beepsand the finish light comes on

[admin]

Re: Miele t4262c pcb repair

Hi Steve

Has this model got the carbon sensor brushes on the op of the drum ? (cant be bothered to look for the manual) 😆

Have these been changed as these will cause the same problem.

Bryan

[steve1]

Re: Miele t4262c pcb repair

hi
yes the carbon brushes are on the top of the drum, no I have not changed them I will try that thanks

[steve1]

Re: Miele t4262c pcb repair

hi
ordered some sensor carbon brushes,
the front thermistor is reading 14.4k ohms
the rear thermistor is 94.4k ohms,the values change when hot or cold

[Author]

Posts