Miele T8961 WP tumble drier Home › Forums › Trade Technical & Spare Parts Forums › Miele T8961 WP tumble drier This topic has 4 replies, 2 voices, and was last updated 3 years, 8 months ago by Micky 32. Viewing 5 posts - 1 through 5 (of 5 total) Author Posts August 9, 2022 at 12:51 pm #101076 Micky 32Participant Hi all. When the dryer runs for a few seconds error F50 beeps and flashes everytime. Is it the main control board? August 9, 2022 at 11:36 pm #483255 electrofixModerator sort of get the poss impression digging around that it may be a motor techo problem if it starts to turn then faults out then check that Dave August 10, 2022 at 6:12 pm #483256 Micky 32Participant Thanks Dave for the reply. The drum doesn’t actually turn. You hear some fans starting up and about 10 seconds later the error comes up. August 10, 2022 at 8:01 pm #483257 electrofixModerator which could just indicate its a motor problem Is the motor or drum jammed ? does motor energise before it faults out ? Dave August 10, 2022 at 10:47 pm #483258 Micky 32Participant No. It doesn’t attempt to turn. All belts ok and turns freely by hand. Author Posts Viewing 5 posts - 1 through 5 (of 5 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In