Miele W827 check inlet

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Miele W827 check inlet

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 20, 2020 at 8:03 pm #97078
    Grommet3
    Participant

    I have just refitted the EL200D control board having had it repaired together with new motor brushes and drum dampers. Now Ive got a blinking “check inlet” light despite the fact I can hear it filling with water. After a while the machine just drains. I am wondering if I might have dislodged something while inside the machine but don’t really know where to look. If I put it on a drain cycle it drains and the drum turns.

    Help would be much appreciated!

    January 20, 2020 at 8:56 pm #466011
    electrofix
    Moderator

    there is a small rubber tube connected to the board
    Did you connect it when you put it back ?

    Dave

    January 20, 2020 at 9:03 pm #466012
    Grommet3
    Participant

    Hi Dave

    Spot on! Thanks.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.