Miele W844

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Miele W844

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 25, 2010 at 9:35 am #56078
    rocker
    Participant

    I have brought some motor brushes from europart No. 12-ML-09 the ends that run on the com have a ribbed edge (instead of normal flat) is this correct. Never fitted these before. ??
    thanks John

    July 25, 2010 at 11:10 am #326156
    Seamy
    Participant

    Re: Miele W844

    they should be ok, they will bed in

    July 25, 2010 at 5:45 pm #326157
    rocker
    Participant

    Re: Miele W844

    Seamy, Thanks mate. John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.