motor brushes melting?

[AASWALES]

hi this haier w/m has been melting the carbons casing i have replaced brushes but it has done it again within 1 wash any ideas thanks alan

[ray.t]

Re: motor brushes melting?

Could it be not draining properly?

[helo_75]

nah, the motors are just crap

ive fitted new motors and theyve burned out while ive been filling the job sheet it

[AASWALES]

Re: motor brushes melting?

hi thanks for your reply’s the machine is draining fine so it looks like hlo_75 could have a point there iv not had much experience with this make but iv been told its a cheepy from currys so u would kinda expect that
thanks again guys cheers alan

[adv]

Re: motor brushes melting?

thow it in bucket garbage 😆

[torxhead]

Re: motor brushes melting?

interesting.

im not familiar with the make, but ive once had a a3060 hvr 1100 burn through a pair of genuine carbons after one spin cycle.

i put another set in, and it was ok.

i put it down to faulty carbons,
the genuine carbons burned out, fitted pattern onse afterwards and they were ok.

my conclusion; not all genuine parts are better than pattern parts

[Author]

Posts