Neff 6544WM Washing machine

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Neff 6544WM Washing machine

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #17275
    mike412
    Participant

    Hi Everyone.

    I need a bit of help in sourcing parts (bearing overhaul ) for this machine which seems a bit of an oddball. (a non Neff naff Neff) . No e numbers , made in Italy. Done a Search on UKW but a phone call to Roger draws a blank.

    Any assistance much appreciated.

    Mike.

    #173582
    Dave_Conway
    Participant

    Re: Neff 6544WM Washing machine

    The only model on the BSH spares site with 6544 in it is a top loader, I assume this is a front loader ?

    Dave.

    #173583
    mike412
    Participant

    Re: Neff 6544WM Washing machine

    Thanks for your reply Dave.

    Yes this is a front loader. I have already been on the Bosch website without success. The only info I have been able to find is by the UKW search which brings up a thread from eng14 on 29/03/06, which has a reply from pup inviting the phone call to Roger, tried calling Roger but number unobtainable. Perhaps “pup” can tell us more about this machine?.

    Regards,
    Mike.

    #173584
    Martin
    Participant

    Re: Neff 6544WM Washing machine

    Yes the Neff 6544 is a Spanish made (Balay) m/c. There’s also a 6543 model as well, all made between 1989-1990 so well old and parts mainly obsolete 🙁

    #173585
    ANDYVIVO
    Participant

    Re: Neff 6544WM Washing machine

    Hi,

    This machine is 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} siltal, any chance of the bearing seal size?
    It may be possible to find the siltal genuine part number.
    Other than that, it would be a phone call to BSH, for all the Siltal spares through Bosch, are recoded.

    Regards Andy

    #173586
    mike412
    Participant

    Re: Neff 6544WM Washing machine

    Thanks for replys guys.

    The customer has decided to “run machine into the ground” and then Buy new.

    Thanks for your help.

    Regards,
    Mike.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.