Neff Dishwasher S54m45x5gb/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff Dishwasher S54m45x5gb/01

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 8, 2010 at 2:39 pm #53058
    kevinlewis
    Participant

    We have been out to the above, fault reported, taking in water but spray arms not going round. Found machine filling and immediately pumping out then re filling continuously. as though the anti flood device was operating. The air trap and pipes looked clean. I pumped all the water out of it by lifting the red plastic plunger then it stared working okay. Customer has now rung back timer not counting down, and spray arms not going round again. Any ideas?????

    FD. 8708 03061
    Cheers.

    March 8, 2010 at 9:24 pm #314229
    PINKY
    Participant

    Re: Neff Dishwasher S54m45x5gb/01

    Triac blown on main pcb?

    March 8, 2010 at 10:40 pm #314230
    eastlmark
    Moderator

    Re: Neff Dishwasher S54m45x5gb/01

    impellor jug most likely.

    April 12, 2010 at 8:12 pm #314231
    kevinlewis
    Participant

    Re: Neff Dishwasher S54m45x5gb/01

    you were correct , it was the Jug. now sorted.
    Thankyou very much.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.