Hi Folks,
Apparently frost is evident within about six weeks of manual defrost
About 500 ohms across heater
7.6 K Ohms temp sensor at approx ambient (defrosted appliance)
0 ohms t fuse
380 ohms between red and white leads of fan but couldn’t detect anything between yellow and either of the other two. The fan operates so I assume it’s ok
Gutter not blocked with ice or food debris and drains ok
No error code displayed
Wondering if the control module is at fault. Does anyone know if there’s a way to force defrost? Also any ideas about accessing error codes.
Cheers, Derek