Neff microwave E10 fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff microwave E10 fault

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 1, 2013 at 1:33 pm #75680
    Dapman
    Participant

    Hi
    I went to look at a Neff microwave, model B6774 N0GB because the customer was having problems with some of the buttons on the facia panel.

    I ordered a new one from Connect and fitted it. When I tested it, I got the message E10 MW fault.

    What I did notice was the packaging on the new board had been opened prior to me receiving it.

    I refitted the original board but still had the same error message.

    I`ve searched on the internet and it has been suggested it may be a blown fuse.

    If so, why would the fuse blow because of changing the facia panel, unless its faulty.

    Any suggestions would be appreciated.

    Dave

    June 1, 2013 at 5:28 pm #395819
    Martin
    Participant

    Re: Neff microwave E10 fault

    Dapman wrote:Any suggestions would be appreciated.

    Type E10 in the search box and the answer you are looking for is there! 😉

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.