- This topic has 1 reply, 1 voice, and was last updated 15 years, 4 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi
Looking for a bit of help on this induction hob.
When it is in use the number of hobs that work vary daily.
IE to day the user could only get 1 ring to work out of the 6.
I only can think that this is the board but being induction and touch control is htere any thing eles that could cause this problem
Geoff
Re: Neff T1872NO/01 fd8402
Just to update this one.
problem was with the PCB As it would work for upto 10 mins then some of the rings would stop working and not come back on plus one ring would not work at all.
The supply to the house was only 220v and dropped as appliances where being used ( with hob and oven on dropped to 208v into house). Makes me wonder if this have anything to do with the failure of the module 😕
Geoff
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.