Not Completing a cycle or spin

[dogstar]

I have carried out the error3 post.Pressure sensor.Not to sure where this sensor is situated on on my model washing machine Lamona hja8552.No blockage and pump is working.Can anyone help please.

[kwatt]

Re: Not Completing a cycle or spin

The pressure sensor is at the end of the thing hose that comes off the pump housing.

Essentially the machine is a Hoover Nextra in disguise and the fault codes are here for that series:

http://www.ukwhitegoods.co.uk/help/faul … codes.html

Those tell you about as much as we know really along with what the possible reasons could be but, it does require a bit of detective work to figure it out all too often.

K.

[dogstar]

Re: Not Completing a cycle or spin

Hi,thanks for the reply.I’ve done the hoover nextra error03 thats whats showing on my machine.Put a new pump on and the checks. but still coming up with the same errors.

[kwatt]

Re: Not Completing a cycle or spin

No idea then, I have little experience with those machines but all you can do is have a look at the pressure switch etc, failing that it is possible the main control board is faulty if all other reasons are eliminated.

K.

[Martin]

Re: Not Completing a cycle or spin

Spurious errors like this are often caused by an earth leak on the water heater. So your next move, check the heater with a meter. 😀

[dogstar]

Re: Not Completing a cycle or spin

Im a bit of a newie.Do you mean the heater, as in element.

Martin wrote:Spurious errors like this are often caused by an earth leak on the water heater. So your next move, check the heater with a meter. 😀

[Martin]

Re: Not Completing a cycle or spin

Yes.

[dogstar]

Re: Not Completing a cycle or spin

thanks a lot for your help

[Author]

Posts