Old Crouzet timer motor?

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Old Crouzet timer motor?

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #56033
    iadom
    Moderator

    Just been out to a Hoover Ecologic in tip top order.

    Sadly the timer motor has failed. I used to carry loads of these but its many moons since I last did one.

    Has anyone got a spare timer motor or even a coil that they could let me have for a Small consideration ?

    The coil used to be Qualtex part number TIM02 and the motor complete was MTR152, I’m guessing those are long since obsolete. 😥

    Jim.

    #326022
    iadom
    Moderator

    Re: Old Crouzet timer motor?

    Anyone… 😥

    #326023
    geoff1
    Participant

    Re: Old Crouzet timer motor?

    Jim

    I have not got one but the part numbers quoted are in stock with Qualtex

    Geoff

    #326024
    iadom
    Moderator

    Re: Old Crouzet timer motor?

    Thanks Geoff, will see what I can sort out in the morning. 8)

    #326025

    Re: Old Crouzet timer motor?

    I’ve got several s/h Crouzet timer motors all thin coil and two brand new thick coils 😳 . Going to landfill soon if you don’t want them. Last time I used one must be about ten years ago.
    Mike.

    #326026
    iadom
    Moderator

    Re: Old Crouzet timer motor?

    DS Supplies in Stoke have one left on the shelf, the last one they sent out was in 2006. 🙂

    Winging its way to me as I type this. 8)

    Sorry I missed your post Mike, had an early night.

    Jim.

    #326027

    Re: Old Crouzet timer motor?

    Never mind. Next time anyone does a search for one of those it should bring up this thread, so I’ll await the deluge of PMs. 😆
    Mike.

    #326028
    iadom
    Moderator

    Re: Old Crouzet timer motor?

    They won’t be taking up much room in the panniers will they? 😆

    #326029

    Re: Old Crouzet timer motor?

    Every little bit of weight counts! So they haven’t been in the panniers for a very long time. 🙂
    Mike.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.