Old Hoover dryer Classica D6850 not heating Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Old Hoover dryer Classica D6850 not heating This topic has 3 replies, 4 voices, and was last updated 15 years, 10 months ago by boselecta. Viewing 4 posts - 1 through 4 (of 4 total) Author Posts June 12, 2010 at 3:26 pm #55198 boselectaParticipant D685030300851 Dryer starts heating for about 1 min then stops heating and tumbles cold. I am thinking it could be a faulty TOC cutting in or it could be the thermostat? About 25 years old, does anyone remember working on these old machines? any ideas gents? June 12, 2010 at 4:36 pm #322253 iadomModerator Re: Old Hoover dryer Classica D6850 not heating Round about 1993/4. I can scan and e-mail you the wiring diagrams if you like. Jim. June 12, 2010 at 4:49 pm #322254 timdowningParticipant Re: Old Hoover dryer Classica D6850 not heating I’m sure this model had the tablet type toc pop riveted in the front metal shield where the heater is. When it failed it did give you that symptom. June 15, 2010 at 3:48 pm #322255 bigchrisoioiParticipant Re: Old Hoover dryer Classica D6850 not heating i agree…..we used to change that tablet toc for this fault when i worked at hoover……. there used to be a hotspot on the spiral element so we would stretch the element where it was sited next to the tablet Author Posts Viewing 4 posts - 1 through 4 (of 4 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In