Old hoover logic module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Old hoover logic module

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 9, 2009 at 3:40 pm #44895
    cornwell40
    Participant

    Anyone got a 2EC38 / 1300 module kicking about anywhere (second hand preferrable). Got an old dear with a pristine logic 1300, fitted an armature (old one segs lifted) and now its juddering badly and got little power. Rather try a module first before going for motor at nearly £150.

    TC

    April 9, 2009 at 4:05 pm #282839
    Martin
    Participant

    Re: Old hoover logic module

    Yes I have a QER recon 2EC38 1300 Hoover Module right here. 😀

    QER will also repair your old one of course. 😉

    April 9, 2009 at 4:44 pm #282840
    timdowning
    Participant

    Re: Old hoover logic module

    Does it run well at full speed?

    Connector off module.
    Connect Live and Neutral wires together that go to module.
    (Belt off machine as well.)

    Excuse me if you knew the above.

    April 11, 2009 at 11:16 am #282841
    cornwell40
    Participant

    Re: Old hoover logic module

    TBH on spin it sounds fine, distribute and wash it is lumpy as owt.

    TC

    April 14, 2009 at 12:25 am #282842
    leavemetogetonwithit
    Participant

    Re: Old hoover logic module

    Timer a common cause of this. Don’t recall ever having one of those modules go. Think I threw away all but a couple cause they were so damn’ reliable 😈 . Think emw do the timer recon.
    Mike.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.