on the hunt for a new dishwasher

[frustin]

Is there a make that you get the least amount of call outs for?

i’m looking at which! whom are recommending (full size freestanders) in their best buys:

bosch SGS45C02GB

miele G1222SC

miele G1232SC

needless to say the miele’s are VERY expensive. do you get what you pay for with them?

Edt: I just found the guide on this site.

[Penguin45]

Re: on the hunt for a new dishwasher

Don’t forget THIS. Our very own ISE5 dishwasher – mmmm, nice.

Penguin45.

(Waits for the Hornsby to come along and rubbish something he hasn’t even seen yet……..)

[frustin]

Re: on the hunt for a new dishwasher

i am thinking of waiting for the ISE10 actually. i noted you put that it’ll be available end of the year, beginning of next. got more of a firm date?

[kwatt]

Re: on the hunt for a new dishwasher

Hi frustin,

We don’t have a firm date as yet but I suspect that it will be very late this year as there is a minimum of a 13 week lead time from the point at which we order the machines.

I keep pushing to get them though as I have the pre-production machine on test here at home and it is the best dishwasher I’ve ever used by a country mile. Apart from the fact it washes better than anything else I’ve used it’s so quiet I have to almost put my head up to the door to hear it running!

If you can wait for the 10 I’d wait as it is just an outstanding bit of kit.

K.

[hushpuppy7]

Re: on the hunt for a new dishwasher

kwatt wrote:If you can wait for the 10 I’d wait as it is just an outstanding bit of kit.K.

Hi Kwatt,

I was about to buy an ISE5 Dishwasher, having just bought and awaiting delivery of my ISE10 washine machine. So I think I might wait for the ISE10 dishwasher as you suggest, any updates on launch date??

BUT

Do you know if they will do a fully integrated version of the ISE10 dishwasher? If not will the dimensions be the same as the ISE5? I only ask as to replace my current fully integrated dishwasher I have the following dimensions in my cupboard to play with:

Total Height 86.5 cm
Plinth height 15 cm
Depth 59 cm
Width 60 cm.

So what I was hoping was to mount the existing kitchen door on hinges onto the plinth so it opens down, but I do not know what the height from the feet of the new ISE10 dishwasher is to the bottom of the door to see if I have enough clearance? Also is 59 cm depth enough to fit in the ISE10 with the pipes etc at the rear?

Can you help??? ❓

Thanks

[Author]

Posts