- This topic has 14 replies, 5 voices, and was last updated 15 years ago by
.
-
Posts
-
will this work?
it had managed to blow the compete track off one side so rather than lay a track of solder down to the connecter, im hoping to mate the 2 flying leads to the wires on the connector from the loom.
the miele is at least 15 y/o and cust wants to keep it as a 2nd machine for doggy stuff and sports kit but wasnt willing to spend the £140 odd quid for the pleasure 🙂
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
bridging out blown tracks will only work if you know why they have blown
as with most miele units the wiring sheets are inside
trace blown track to see what it feeds its better than a big bang when you turn back onDave
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
oh yeah, of course just like when you get a board back from emw theres often a reason why it went. i didnt actually go out to see this one tho so cant say where the loom heads to, its just ive got the taste for a bit of pcb repairing now, and need the confidence that you guys give with your support that tells you your on the tight track, or doing a complete no-no 🙂
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
Have come across this before & luckily been able to repair with a soldering iron, think leak from soap dispenser or door gasket can cause the problem
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
Don’t see many Miele, this is the impoverished North you know. 😥 🙂
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
impoverished north? HOLLOCKS! manchester and leeds are the new londons.
i would have said the man u, man city and newcastle players could keep you in business for a year???
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
Well I do know someone in Yorkshire who paid over £3k for a commercial Miele with a 12 month g/tee for average domestic use. 😯
But Higher Water Level does not sound like a ‘normal’ Yorkshireman, have you ever heard ‘Tykes motto’. 😆
“Eat all, sup all, pay nowt,
‘Ere all, see all, say nowt.
And if tha does owt fer nowt,
Alus do it fer thisen”Jim.
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
“im terribly sorry but its frightful how little i can understand of that. are you english?” 😀
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
Only just seen this. Did you figure out what blew it? Maybe like Seamy says, leak from soap disp or holed seal hits door lock and bang. If there are push button switches on the other side of that pcb they may also be damaged. If it’s the pcb with a yellow button for door opening, maybe they can do without that and just use the emergency pull tab by the filter.
Mike.Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
we think it was external factors, until i get back to it i cant be sure, but there wasnt a hurry on for this repair, will keep you updated though, switchgear seems to check out and theres not much else other than solder on the pcb, so no reason for it to “not” work. problem with htis switchbank iirc is the track also affects the on/off, so no track, no worky 🙂
Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
Had a < 5 y.o.(not sure exact age) Miele do something similar with its on/off pcb a few months back. Customer was a fully-fledged electrician yet even with our two heads working together for two hours we didn't manage to get the machine going again. (At least I still got paid for trying.) When I left he was still convinced it would be righted by simply getting a new pcb/switch. I wasn't convinced of that but left him to it. Never heard what happened. Mind you that was a more "electronic" machine.
Mike.Re: one for mike LMTGOWI / jim IADOM – miele w800 6 switch p
iadom wrote: have you ever heard ‘Tykes motto’. 😆
“Eat all, sup all, pay nowt,
‘Ere all, see all, say nowt.
And if tha does owt fer nowt,
Alus do it fer thisen”Jim.
Not much hope for Cameron’s “Big Society” up there then 😆 .
Mike.
- You must be logged in to reply to this topic.