Oven & grill not working – Zanussi ZBS 773

Home Forums Public Support Forums Help And Support Cooker And Oven Forum Oven & grill not working – Zanussi ZBS 773

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #89118
    mac123
    Participant

    Hi,

    The oven & the grill on my Zanussi ZBS 773 electric oven are not working at all.

    All control lights, buttons, clock etc work fine as do the oven light & fan.

    I’m thinking it’s not the elements as the oven & the grill don’t work? (I don’t have a multi-meter here to check them).

    Could it be the thermostat?

    It hardly seems to have been used so everything looks in good condition.

    Any help would be greatly appreciated.

    Thanks Ian

    #440392
    electrofix
    Moderator

    Re: Oven & grill not working – Zanussi ZBS 773

    the clock may work but is it in manual mode ?

    Dave

    #440393
    mac123
    Participant

    Re: Oven & grill not working – Zanussi ZBS 773

    Hi Dave.

    I think it is. There is no timer set on it or anything.

    Do you know how I double check its in manual mode?

    #440394
    electrofix
    Moderator

    Re: Oven & grill not working – Zanussi ZBS 773

    just looked up your model and it seems the electronics control everything

    from that I would expect it may be a board fault and difficult to fix yourself without expert help

    Dave

    #440395
    mac123
    Participant

    Re: Oven & grill not working – Zanussi ZBS 773

    Hmmm, was worried that might be the case about the electrics.

    Gonna pull it out & have a look at the board etc just incase it’s anything obvious.

    Thanks for your help Dave.

    #440396
    mac123
    Participant

    Re: Oven & grill not working – Zanussi ZBS 773

    OK, so been told it’s an electrical fault with one of the two circuit boards (not sure which one as i’m in France & my language skills are not good enough to understand 😉 ).

    They also said the part is unavailable.

    I’m sure I can get hold of one but without knowing which board is faulty it’s not gonna work out.

    So I guess thats it, new oven time 🙁

    Seams a real shame to dump this oven when it’s in such good shape otherwise.

    Unless you guys have any other ideas on how to diagnose the board?

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.