Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › part no,s req
- This topic has 11 replies, 4 voices, and was last updated 19 years, 11 months ago by
funkyboogy.
-
AuthorPosts
-
May 8, 2006 at 7:56 pm #17669
funkyboogy
Participant1st zanussi wd zd 15. pnc 914647952/00
motor req2nd bosch wfb 2005gb/16 part no for timer and rrp ??
cheers allyMay 8, 2006 at 8:07 pm #175675gegsy
ParticipantRe: part no,s req
funkyboogy wrote: bosch wfb 2005gb/16 part no for timer and rrp ??
cheers allyHi Ally
Timer 165827 – £45.80 + Vat. (BSH Prices)
GregMay 8, 2006 at 8:13 pm #175676Penguin45
ParticipantRe: part no,s req
Drive motor is 1240369-09/8. Have you picked this one up as a job?
http://www.ukwhitegoods.co.uk/modules.p … ic&t=14222😀
Timer list price is £53.81 +VAT.
Evening Gegsy…….
Chris.May 8, 2006 at 8:16 pm #175677gegsy
ParticipantRe: part no,s req
Evening Mr P
Thought you would sort the Zanussi one out 😀Greg
May 8, 2006 at 8:17 pm #175678whitevanman
ParticipantRe: part no,s req
Al
1st zanussi wd zd 15. pnc 914647952/00
motor reqmotor part no 124036900 £96,61
Hope this help
Wvm
May 8, 2006 at 8:25 pm #175679Penguin45
ParticipantRe: part no,s req
whitevanman wrote:motor part no 124036900 £96,61
‘Ere WVM,
There’s three p/no supercessions after that one……… 😆Chris.
May 8, 2006 at 8:46 pm #175680whitevanman
ParticipantRe: part no,s req
Penguin45 wrote:
whitevanman wrote:
motor part no 124036900 £96,61‘Ere WVM,
There’s three p/no supercessions after that one……… 😆Chris.
appols, for a 26year old machine I suspect there is many :rotfl:
Wayne
May 8, 2006 at 8:58 pm #175681funkyboogy
ParticipantRe: part no,s req
cheers guys,
& yes p45, job picked up.
another from ukw ,May 8, 2006 at 9:21 pm #175682Penguin45
ParticipantRe: part no,s req
Where’s me fee? I did the diagnosis for you! She did sound rather attatched to it, mind you.
Hope it works out,
Chris.May 8, 2006 at 9:36 pm #175683whitevanman
ParticipantRe: part no,s req
Penguin45 wrote:Where’s me fee?
Chris.I dont think there is any chance of that, he still owes me a Pint 😆
As I said last week al
Good luck, Hope it works out
Wayne
May 9, 2006 at 11:19 pm #175684Penguin45
ParticipantRe: part no,s req
Bee Fuddled wrote:Your diagnosis was correct…a new motor installed.
Total cost [b]£90 [/bBlooming heck Ally, I told her the SSP in the thread……… You could have made a decent profit at that price!
Chris.
May 10, 2006 at 7:43 am #175685funkyboogy
ParticipantRe: part no,s req
mis quoted price, couldn,t re-price.
still managed to make a bit of it.. -
AuthorPosts
- You must be logged in to reply to this topic.
