poor spin full loads only

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › poor spin full loads only

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 20, 2006 at 11:12 am #15764
    delta01
    Participant

    zan wjd1257w not blocked , filter clean , spins fine with small or no load , diagnostic last error 61 = not reaching temp.in time allowed, any suggestions please ?

    February 20, 2006 at 5:20 pm #166247
    Dave_Conway
    Participant

    Re: poor spin full loads only

    The “61 = not reaching temp” suggests a heater fault perhaps ?

    It may be interfering with the PCB/Spin control.

    Dave.

    February 20, 2006 at 5:41 pm #166248
    delta01
    Participant

    Re: poor spin full loads only

    thanks dave will investigate

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.