Prima LPR600/1 Dishwasher

[maltheviking]

Prima LPR600/1 Built in Cheap cr8p Service no 854560015871

Not usually stumped with these beggers but I thought I would pass this around on the forum

Machine fills OK and starts to wash OK, 7 seconds after wash pump starts, it stops for about 2 sec then re starts for another 7 secs 😕 Does this about 5 times then aborts the program and pumps out with four bleeps when empty. No flashing fault code.
It can then be re started with the same result.
It has a strange wash pump with a circular heater on the front of, not seen this before.
My suspicion is the module

Any help please
Mal

[Penguin45]

Re: Prima LPR600/1 Dishwasher

Possible earth leak on heater, usually pcb IME.

Chris.

[maltheviking]

Re: Prima LPR600/1 Dishwasher

Penguin45 wrote:Possible earth leak on heater, usually pcb IME.

Chris.Hi Chris I did and insolation test on the appliance especially the heater, tried a new ntc. I could only test other components from the module as the eedyot has built it in so it won’t come out from the unit.

I have just been onto the customer and advised that I am 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure it’s the module, left him to decide.

Would still like to get to the bottom of this

[Author]

Posts