Problems with Zanussi WJD 1667 W

[frozenballs]

hi guys im having problems with my above washer dryer im putting it on drying function and its coming up with a E10 fault code , it washed last night fine and i belive it is washing ok . i have cleaned the condenser out inside checked all of the pipes for blockages and bends ( they seem fine i removed most of the pipes to check ) when i turn the drying function on there is no water running through the condensor which i know is meant to happen also the heater element is not heating and the heater fan is not turning ( fan motor was replaced around 3 months ago ) what would be the cause of no water running through the condenser please

[helo_75]

erm, the valve?

the green coil on the three way valve is faulty

unplug and replace

the fan and heater wont run for a good few minutes when you switch it on

hiope this helps

[frozenballs]

Re: Problems with Zanussi WJD 1667 W

100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} correct thankyou part bought from partmaster for 19.99 and we paid the 9 for nextday delivery as we have two babies and the missus was in a panic third time in a year i have had to repair this machine

1st was the waste water pump went on the blink would not drain the water itself i had to do it manually

2nd was the heater fan went on the blink noticed when the dryer was in operation the fan was struggling to turn

3rd was this triple inlet solinoid valve noticed there was no water going through the condensor and you confirmed what i thought

oh and not forgetting the 100 or so times i have opend the unit to clean the condensor out

many thanks for help given hopfully there is nothing else that is likely to go or is COMMON to go

[Author]

Posts