rangemaster 110

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › rangemaster 110

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 22, 2009 at 12:42 pm #43665
    karenjones55
    Participant

    Hi all, I have a problem with the right hand oven on a classic rangemaster110 gas oven,the flame ignites to a pilot light and the spark generator stops, the flame will not increase from this wherever the control knob is set, is this a faulty fsd or are there other likely causes, the serial # for the appliance is 6179 (100534).
    Regards
    Paul

    February 22, 2009 at 6:19 pm #278066
    Washman
    Participant

    Re: rangemaster 110

    Hi

    You need a Corgi registered engineer to look at this.

    Washman

    February 22, 2009 at 9:39 pm #278067
    admin
    Keymaster

    Re: rangemaster 110

    Hi

    yes you will need a Corgi engineer to change the FFD ass,there are 2 different types for this oven.

    Bryan

    February 24, 2009 at 8:38 pm #278068
    wsts
    Participant

    Re: rangemaster 110

    r600a wrote:Hi

    yes you will need a Corgi engineer to change the FFD ass,there are 2 different types for this oven.

    BryanIn fact there are 3 types.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.