re Diplomat Slimline d/w ADP8902

[ashfordkent]

Hi all. Got a Slimline Diplomat d/w ADP8902 called out as dead. no lights, nothing. Removed console checked door s/w and on/off ok. Removed module from cover nothing looked amiss. Refitted burst into life but will only Programme with great difficulty, then Pumps out for around 2 to 3 mins, fills, then washes for 2 to 3 mins and then stops Dead. Wash light still on no flashing error lights. Is it the Module Cheers ? Built in so well (badly) that will be a miracle if it comes out.

[eastlmark]

Re: re Diplomat Slimline d/w ADP8902

check for water in the base.

[Penguin45]

Re: re Diplomat Slimline d/w ADP8902

We stuck THIS up for the public’s benefit concerning SMEG dishwashers – it’s all true. The pcb can still be borked regardless.

Chris.

[ashfordkent]

Re: re Diplomat Slimline d/w ADP8902

No water in Base. Float not activating. as said wont cancel easy and difficult to select. When diffrent prog can be selected drains around 2-3mins fills ok starts to wash for same sought of time 2-3 mins then just stops Dead wont start up again.

[Penguin45]

Re: re Diplomat Slimline d/w ADP8902

Yersss – classic module problem, take into account what the article says -corruption issues are rife.

Penguin45.

[ashfordkent]

Re: re Diplomat Slimline d/w ADP8902

Cheers Penguin. Think it must be that, just wanted a check b4 buying an expensive pcb. Dont think customer will want it doing.

[Author]

Posts