Rear height level adjustment Whirlpool dishwasher

[daveypez]

I want to know how the rear support wheel on my dishwasher is attached. Does it adjust for height by screwing it upwards? (I can only just reach it with my fingertips)

It’s a Whirlpool DWF416W dishwasher which I can’t get out from under the worktop as it sits on a tiled floor and the tiles only just reach behind the bottom trim panel/kickboard/plinth.

I can screw up the front feet above the tile height and drag the machine forward until the rear support wheel hits the tiles. Then I’d need to lift it 9 or 10 mm at the rear but the worktop stops me doing that. So I need to reduce the height of the rear (wheeled) support.

Anyone know how that’s done?

[admin]

Re: Rear height level adjustment Whirlpool dishwasher

Hi

There is a plastic adjuster in the centre of the base cover which faces you,normally looks like a white nut with a phillips in the centre(if my memory serves me)This then lifts the foot up or down dependent on which way its turned.

Bryan

[Author]

Posts