- This topic has 1 reply, 2 voices, and was last updated 15 years, 11 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi
Can anyone offer any advice on how to replace bearings/seal on a Beko washing machine, model number WMA 765s? I understand that its a pretty big job.
Thanks
Re: Replacing bearings and seal in Beko WMA 765s – help need
Hard work one, this one. Front of casing off, tank out and split is the short answer. Take lots of pictures and make diagrams.
The bearings themselves are knocked out with a large hammer and a drift – the hardest part of the job is to persuade the bolt out of the pulley.
Penguin45.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.