Return Switch Required

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Return Switch Required

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 16, 2005 at 9:02 am #9597
    laurenceuk
    Participant

    Hi Folks,

    I am looking for a two or three tag start switch to fit to a Creda T/D 37406. The part is obselete. It has to be sprung loaded to “normally open”. Something like the old Philco 7142 start switch for those who can remember, or anything like it. I found one in an old Maddocks catalogue but Electru show this as just a normal ON/OFF switch.

    Any help would be appreciated.

    Thanks

    Laurence

    May 16, 2005 at 10:31 am #134813
    Martin
    Participant

    Re: Return Switch Required

    Sprungloaded Philco start switch I’ve got Laurence, if that would do?

    May 16, 2005 at 10:35 am #134814
    iadom
    Moderator

    Re: Return Switch Required

    The Hotpoint twin tub spin switch is also sprung loaded, only 2 tag though.

    Part No: 149283

    May 16, 2005 at 10:40 am #134815
    Dave_Conway
    Participant

    Re: Return Switch Required

    RS do them as well

    http://www.rswww.com product code 287-7284

    Dave.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.