Samsung P1453

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Samsung P1453

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 12, 2009 at 9:25 pm #47760
    reaper
    Participant

    Machine goes to out of balance code UE even when tested with nothing in, it empties ok but timing display goes from 9 to 8mins then back to 9 before UE kicks in.Pressing Start/reset doesnt reset it – you have to switch the m/c off then back on.Any clues please.

    August 12, 2009 at 9:37 pm #294490
    suedehead1
    Participant

    Re: Samsung P1453

    sounds like the circuit board.

    August 13, 2009 at 6:41 am #294491
    funkyboogy
    Participant

    Re: Samsung P1453

    YIP PCB REQUIRED FOR THIS …
    ALLY..

    August 13, 2009 at 6:37 pm #294492
    A1_Domestics
    Participant

    Re: Samsung P1453

    Are there any issues during filling?

    August 13, 2009 at 6:54 pm #294493
    reaper
    Participant

    Re: Samsung P1453

    Ok filling ,washing and rinsing, fault just on spinning.I’ve quoted customer for a new board and she’s decided to buy a new m/c.Thanks for replies.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.