Samsung W/machines

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Samsung W/machines

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 14, 2011 at 12:36 pm #60196
    smeghead
    Participant

    Going to look at Samsung W/Machine on Monday- Always said no to Samsung before through lack of expereince, but this client only lives round corner so thought i’d ‘ave a look.
    Question: What are they like to work on , fault is no drain out ( he’s checked filter) and error coming up.
    Thanks, Clive.

    January 14, 2011 at 2:37 pm #341066
    Jackal
    Participant

    Re: Samsung W/machines

    Easy unless a drum change is involved.

    Pumps are notoriously useless. So bad we have them shipped in direct from Korea in boxes of 144 at a time, so I suspect a no drain will be the pump.

    Regards

    Jackal

    January 14, 2011 at 4:19 pm #341067
    allan73
    Participant

    Re: Samsung W/machines

    You can fit askol pumps on these I think.

    January 14, 2011 at 5:45 pm #341068
    smeghead
    Participant

    Re: Samsung W/machines

    Thanks for feedback chaps, starting to get a few enquires re Samsung machines . Be handy if it is askoll.
    Clive

    January 14, 2011 at 5:59 pm #341069
    A1TEC
    Participant

    Re: Samsung W/machines

    Askoll should fit,done one a while back, worth while looking on the web to see what samsung charge for the pump. 😯

    January 14, 2011 at 7:58 pm #341070
    funkyboogy
    Participant

    Re: Samsung W/machines

    yip asko fit .. pmp988 connect

    tip appliance back , 3screws out /in job done ,

    as jakal says pumps are crap , impellor will have fallen of

    ally

    January 15, 2011 at 1:52 pm #341071
    Lawrence
    Participant

    Re: Samsung W/machines

    Be careful Clive some are now TOC protected so change like for like.
    Lawrence

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.