Servis M491 Wash Cycle incomplete

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Servis M491 Wash Cycle incomplete

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #19918
    kuango
    Participant

    Setting the dishwasher to a wash cycle we get all the usual operations.
    Drain Down, Fill up, Dispenser Door Opens, Water Heats up and the Timer knob turns through the cycle. The problem is that the wash pump does not fire up. Am I right to think that the pump is failing rather than the Timer being faulty. When checking each component I noticed a mains hum from the pump but was wondering if this was because the timer is not switching the pump on or it has but won’t start because maybe the windings have gone down. I noticed this wash pump was a capacitor start.
    Any pointers we be greatfully received.

    kind regards Tony

    #185013
    Washman
    Participant

    Re: Servis M491 Wash Cycle incomplete

    Hi

    Check the capacitor, also might be something in the pump

    Mike

    #185014
    kuango
    Participant

    Re: Servis M491 Wash Cycle incomplete

    Hi Mike

    Just got back from that job.
    Although the capacitor was fine the wire leading from it to the wash motor had been arcing on the base plate and had corroded the wire.
    The machine must have had a flood at some point as the base plate was rusty and the insulation must have broke down. I remade the wire connection and it ran up just fine.
    Alls well that ends well.
    Thanks for the Tip.
    Yet another Happy customer.

    Kind regard Tony

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.